產品展示PRODUCTS
*1. 使用放大器單元的無接點輸出控制時的Z低值測量條件：使用標準檢測物體、檢測物體的間隔為G6B-1174P-FD-US,OMRON放大器分離接近傳感器參數標準檢測物體的2倍、設定距離為檢測距離的1/2The three factors in color, i.e. hue, saturation and brightness
更新時間：2025-01-04
訪問量：2308
廠商性質：經銷商
G6B-1174P-FD-US,OMRON放大器分離接近傳感器參數
大器單元部分的“額定規格/”請參見Catalog
可檢測物體磁性金屬(非磁性金屬的檢測距離較短
鐵5×5×1mm 鐵8×8×1mm 鐵12×12×1mm
鐵18×18×1mm 鐵30×30×1mm 鐵50×50×1mm
1kHz 800Hz 350Hz 100Hz 50Hz
工作時、保存時：各-25～+70°C (無結冰、結露)
環境濕度范圍工作時、保存時：各35～95%RH (無結露)
-25～+70°C的溫度范圍內+23°C時，檢測距離的±15%以下
10～55Hz 上下振幅1.5mm X、Y、Z各方向2h
G6B-1174P-FD-US,OMRON放大器分離接近傳感器參數
value, are measured and digitalized. And whilst an accurate
differentiation of the color is performed, it is also possible to
measure the color variety with the deviation measurement
function (with color camera connected).
The existence or not and the position
of the edge is measured. Oblique
edges can now be measured even in
complex conditions and even more
accurate position measurements can be taken. The peak
bottom measurement function that
G6B-1174P-FD-US,
銷售部